This is our Reversing Camera Kit for the Audi A4 ( B8, 8.5 ) A5 ( 8T ) and Q5 ( 8R ) from 2009 to 2016 fitted with the Multimedia MMI system with the radio controls at the base of the gear selector. It is NOT compatible with the Concert or Symphony Audio unit with the radio controls on the audio unit. It has two plug and play looms to be connected at the rear of the radio and at the rear of the heater controls. Once fitted the camera image will be displayed on the screen as soon as the Reverse Gear is engaged and it will show the Dynamic Parking Guidelines that move with the steering wheel showing the projected trajectory of the vehicle. If your parking sensors show onscreen before installation then they will also show on the parking icon on the left side of screen, but if your parking sensors only beep then the parking icon can be removed by simply leaving us a message saying NO SENSORS and we will include an SD card with the kit that will remove the parking icon. If your car has a Manual Gearbox then 1 single wire from the interface will need to be connected to the reverse light wire at the rear lamp – This step is not required on an Automatic Gearbox. The kit comes supplied with our low voltage NTSC tailgate handle camera that will fit perfectly in place of the original one ( If your car has the ‘Concert & Symphony’ System – Please See Our Other Listing ) The kit comes supplied with a USB Key containing fitting photos and detailed instructions. Please see our Product VIDEO to experience this kit in Action.
Why Buy From Us – As our name states we operate through hands on ‘Experience over Theory’ We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.
Our Empirical reverse camera kits are our proudest achievement. We think about the kit and the installation so that you don’t have to. It’s little things like shielded camera cable so you don’t lose DAB / Satellite Radio reception, a small 8mm camera connection plug so that no large plugs or chokes need to be ran through tight tailgate conduits.
When we first create a kit, rather than removing a section of the manufacturers tape on a wiring loom to re route a radio or screen cable to the camera interface, we will get a new extension cable manufactured for the kit. It’s these extra touches that makes our kits what they are!