This is our Reversing Camera kit for the Ford Puma from ( 2019 Onwards ) with Sync3. To check if you have Sync3 onscreen press: Settings-General-About and the software page will be displayed. Sync3 will say Sync3 and a software version ( the version is irrelevant ). This plug & play kit comes with a T harness loom that will plug into the Sync unit behind the instrument cluster. Our low voltage NTSC camera supplied with the kit will replace your existing tailgate handle making it look like it was a factory fitted option. Once fitted simply plug the supplied programmer into the cars OBD port under the drivers side of the dashboard and it will automatically code the Sync unit to activate the rear camera. This will display the camera menu in the settings screen – giving you the option of only having the camera in reverse gear or having a delay option which will keep the camera image onscreen until the car reaches 15 mph. The kit will NOT provide ‘Moving Guidelines’ however our camera has a ‘Fixed Guidelines’ option that is easily removed or added via a small plug on the wiring. If Factory Parking Sensors are installed then they will show on the top right corner of the screen. Once you have used the kits programmer it is of no further use and you are welcome to return it to us via a tracked courier or Royal Mail. Once we have received it, we will credit you £40 back to your original payment account. We also supply a USB Key full of fitting photos and instructions and should you need any Technical Support or advice please contact us via Telephone, Text, email or WhatsApp and we will be happy to help.
Why Buy From Us – As our name states we operate through hands on ‘Experience over Theory’ We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades. This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.
Our Empirical reverse camera kits are our proudest achievement. We think about the kit and the installation so that you don’t have to. It’s little things like shielded camera cable so you don’t lose DAB / Satellite Radio reception, a small 8mm camera connection plug so that no large plugs or chokes need to be ran through tight tailgate conduits.
When we first create a kit, rather than removing a section of the manufacturers tape on a wiring loom to re route a radio or screen cable to the camera interface, we will get a new extension cable manufactured for the kit. It’s these extra touches that makes our kits what they are!