This is our Reversing Camera Kit for the Dacia Sandero 2 & Stepway from 2015 onwards that already has the Factory Fitted MediaNav screen. We Do Not Sell a MediaNav Screen kit for you to upgrade. The kit consists of a Plug & Play Loom that is to be connected to the rear of the radio and our Low Voltage NTSC wedge style Camera that locates in the removable plastic blank directly in between the two rear number plate lamps. An OBD Programmer is also supplied with the kit. When The OBD Programmer is plugged into the cars Diagnostic Socket in the Glovebox it will code the MediaNav unit to switch to ‘Camera Screen’ on activation of the Reverse Gear and the image will remain onscreen for a further 5 seconds after the Reverse Gear is disengaged. Once the programmer has been plugged into the car it will only take 30 seconds to code in the camera and is then tied to that specific vehicles chassis number and cannot be used on another Sandero, Therefore it is NOT a Returnable item once the ‘Security Sticker’ has been Removed. We supply this kit with a USB key, Full of installation photos and PDF fitting information. We are also available via Telephone, email and WhatsApp to help you in any way we can, should you need any Technical advice or Support – please contact us.
Why Buy From Us – As our name states we operate through hands on ‘Experience over Theory’ We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades for all manner of Vehicles throughout the Motoring Industry – This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.
OUR EMPIRICAL REVERSE CAMERA KITS ARE OUR PROUDEST ACHIEVEMENT. We think about the kit and the installation so that you don’t have to. It’s little things like shielded camera cable so you don’t lose DAB / Satellite Radio reception, a small 8mm camera connection plug so that no large plugs or chokes need to be ran through tight tailgate conduits.
When we first create a kit, rather than removing a section of the manufacturers tape on a wiring loom to re route a radio or screen cable to the camera interface, we will get a new extension cable manufactured for the kit. It’s these extra touches that makes our kits what they are!