This is our Reversing Camera Kit for the Mercedes Benz Sprinter Van ( W907 / 910 ) from 2018 Onwards that has the factory fitted 7” screen, this kit will NOT fit the wider 10” screen. This is a plug and play kit with no coding required that connects to the radio unit located behind the screen. Once installed the camera image will be displayed onscreen when the Reverse Gear is selected showing the more modern ‘Dynamic Parking Guidelines’ found on the 2018 onwards Mercedes model range, these guidelines move with the steering wheel displaying the projected trajectory of the vehicle. The kit comes supplied with a replacement Brake Light camera that is 85mm in length and NOT the more common 55mm camera that cannot see past the curve at the top of the vans rear door. If you would prefer a lower viewing angle camera – then please see our Merc Sprinter kit with the wedge style camera in our other listings. For Automatic Gearbox Sprinters the kit is completely plug and play and for the manual gearbox vans 1 single wire is required to be connected to the reverse light wire. The kit is supplied with a USB key full of installation photos and PDF fitting instructions and we also offer technical support via email, telephone, text and WhatsApp – if required. Please See Our Product VIDEO to experience this Kit in Action.
Why Buy From Us – As our name states we operate through hands on ‘Experience over Theory’ We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades for all manner of Vehicles throughout the Motoring Industry – This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.
OUR EMPIRICAL REVERSE CAMERA KITS ARE OUR PROUDEST ACHIEVEMENT. We think about the kit and the installation so that you don’t have to. It’s little things like shielded camera cable so you don’t lose DAB / Satellite Radio reception, a small 8mm camera connection plug so that no large plugs or chokes need to be ran through tight tailgate conduits.
When we first create a kit, rather than removing a section of the manufacturers tape on a wiring loom to re route a radio or screen cable to the camera interface, we will get a new extension cable manufactured for the kit. It’s these extra touches that makes our kits what they are!