This is our Reversing Camera Kit for the Audi A3, S3 & RS3 ( 8V ) model years 2013 onwards. This fully comprehensive kit consists of a plug and play interface ( with no coding required ) for fitting at the MIB unit in the glovebox and it comes with an extra extension LVDS cable ( so that the original plug in the unit does not need to be routed out of the existing loom and back to the interface ) Integrating onto the cars original display screen and activated when the reverse gear is engaged, this unit will display and project ‘dynamic parking lines’ that will move in tandem with the movement of the cars steering wheel – indicating the predicted trajectory of the cars movement and direction. If your factory parking sensors currently show on your screen then they will show on the left hand side of the camera image on screen. If your factory parking sensors only beep or If your car has no parking sensors then please let us know and we will provide a FREE micro SD card with your order, that inserts into the interface which will remove the parking icon from the display screen. Supplied with a replacement OEM style tailgate handle ( with the camera built in ) that will simply replace your original. Please see our Product VIDEO to experience this kit in action.
Why Buy From Us – As our name states we operate through hands on ‘Experience over Theory’ We have over 20 years of Experience in fitting a vast range of In Car Technology Solutions and Retrofitted Upgrades for all manner of Vehicles throughout the Motoring Industry – This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us.
OUR EMPIRICAL REVERSE CAMERA KITS ARE OUR PROUDEST ACHIEVEMENT. We think about the kit and the installation so that you don’t have to. It’s little things like shielded camera cable so you don’t lose DAB / Satellite Radio reception, a small 8mm camera connection plug so that no large plugs or chokes need to be ran through tight tailgate conduits.
When we first create a kit, rather than removing a section of the manufacturers tape on a wiring loom to re route a radio or screen cable to the camera interface, we will get a new extension cable manufactured for the kit. It’s these extra touches that makes our kits what they are!