DESCRIPTION
This is our Reversing Camera kit for the Ford Fiesta from 2018 onwards. Ford now have Sync 3 / 3.2 and 2.5 ( Please see our Photos ) so you do not buy in error. If your vehicle is a 2018 or early 2019 then you will have Sync3. Sync 3.2 has 5 icons along the base of the screen and the radio station name is shown as it’s logo. Sync 3 can have 4 or 5 icons along the base of the screen but the radio station name is only printed. Sync 2.5 has 4 icons along the base of the screen and shows the radio logo on DAB. This kit will not fit the Sync 2.5. Please see our other listing for the Sync 2.5 kit. This plug & play kit comes with a T harness loom that will plug into the Sync unit behind the instrument cluster. Our low voltage NTSC camera supplied with the kit will replace your existing tailgate handle - which will look like it was a factory fitted option. Once fitted simply plug the supplied programmer into the cars OBD port under the drivers side of the dashboard and it will automatically code the Sync unit to activate the rear camera. This will display the camera menu in the settings screen - giving you the option of only having the camera in reverse gear or having a delay option, which will keep the camera image onscreen until the car reaches 15 mph. The kit will not provide moving guidelines but if factory parking sensors are installed then they will show on the top right corner of the screen. Once you have used the kits programmer it is of no use and you are welcome to return it to us via a tracked courier or Royal Mail. Once we have received it, we will credit you £40 back to your Payment account. Supplied with full fitting instructions and for technical help or advice please contact us. Please see our Product VIDEO to experience this kit in action.
